Clothing Fashion

The dress on the left is what I had chosen for the fashion of clothing. This picture turned out relatively bad lighting because it wasn't natural light. I used artificial light while taking this picture because it was late at night, and there was not enough light from outside to capture it. That is why you can see that there is a lot of light at the top of the picture, but a lot less at the bottom of the picture, so the detail is lower where it is darker. But because the picture was taken this way, i couldn't do anything about it. The print on the left shows an aperture of 2.8, with filter 2, at 16 seconds. This was also the first print in which i used a filter because it was too grey. The test strip on the right also shows how grey it looked. When i did my larger print, like i said before, i had to add a lot of time in order to get rid of the greyness. The teststrip also shows the difference is the use of grey at the lowest time in comparison to the highest time. The lowest time is at the bottom of the dress, starting at 30 seconds, going up in two's up to and including 36. Since 36 seconds was the best, my final large print was at 36 seconds, 2.8 aperture, and it had no filter.